Plasma discharge experiments of a Faraday shieldless driver for high-power and long-pulse radio frequency ion source...

Due to the high stability and less maintenance, the radio frequency (RF) driven ion source is preferred for the neutral beam injection (NBI) system. In a popular design of the RF ion source for NBI application, a Faraday shield (FS) is installed inside the RF plasma driver to protect the discharge tube. However, the FS also brings some drawbacks, such as lowering the RF power transfer and increasing the processing difficulty. A prototype of the RF plasma driver without FS and with mature manufacturing technology has been developed by using a water-cooled discharge tube. After basic testing, this prototype was further tested under the RF plasma discharge experiments in views of high power, long pulse, and long term. The reliability and its plasma characteristics were the focus of these experiments, also for the hidden issues. The results show that the prototype could generate stable and high-density plasma without any damage or sputtering mark. An RF plasma discharge of 50 kW and 20 s has been achieved. The expected frequency tuning was equally effective on the prototype. Moreover, compared to the RF plasma driver with FS, the prototype could produce higher electron density in the extraction region under the same RF power. Of course, some of the shortcomings of the prototype have also been exposed in the experiments and will be improved in subsequent experiments.