Related Experiment Video
Updated: Jun 9, 2025

Formulations for Freeze-drying of Bacteria and Their Influence on Cell Survival
Published on: August 3, 2013
Tailoring Crystallization Kinetics in Thin Sucrose Films during Convective Drying: Impact of Temperature and Humidity
Martin Schugmann1, Petra Foerst1
1Food Process Engineering, School of Life Sciences, Technical University of Munich, Weihenstephaner Berg 1, 85354 Freising, Germany.
Abstract:
Drying experiments with varying air temperature and humidity were conducted to investigate the influence of the drying process on the crystallization of thin sucrose films. For the first time, the effects of the nucleation onset, nucleation rate, and growth rate were investigated in situ and their differentiated influence on product crystallinity could be assessed. The growth rate was not influenced by air humidity but showed a strong dependence on temperature. It increased with drying temperature; however, at high temperatures, growth was inhibited when the water content falls below a critical level. Noticeable differences in nucleation behavior could be observed with regard to air humidity. Dry air led to crystallization onsets at lower levels of supersaturation, while moderately humid air retarded it. At higher temperatures, nucleation onset commenced at lower water contents but at a constant supersaturation level. The nucleation rate doubled in experiments with moderately humid air (15% RH), while an elevated drying temperature showed generally lower nucleation rates. The observed differences in the nucleation onset and rate could be explained by the film-internal concentration profile, which is strongly influenced by drying parameters. The insights therefore provide a differentiated understanding of the formation of the physical state and how it can be influenced during convective drying.
More Related Videos
Related Concept Videos
Recrystallization: Solid–Solution Equilibria
Crystal Growth: Principles of Crystallization
Initiating crystallization involves manipulating the concentration of the solute and the temperature of the solution. Since crystal growth occurs when the ratio of concentration and solubility of the solute in the solvent...
Precipitation Processes
Precipitate Formation and Particle Size Control
The obtained precipitate should be either a pure substance of known composition or easily converted to one by a simple process, such as ignition or drying. In addition, the precipitate should be insoluble and easily filterable. In general, filterability...

