Related Experiment Video
Updated: Jun 9, 2025

Simulation of Human-induced Vibrations Based on the Characterized In-field Pedestrian Behavior
Published on: April 13, 2016
Seismic response of a mid-story isolated stilted structure in mountainous areas
1School of Civil Engineering & Architecture, Wenzhou Polytechnic, Wenzhou, China.
Abstract:
Research on the SSI effect on flat sites has yielded many valuable conclusions. However, current research on the impacts of various special local terrains on structural dynamics remains limited. For mountainous areas, it is common to construct houses in a multi-step, climbing, and laterally staggered architectural form that follows the mountain terrain. Only through the analysis of the combined action of the upper and lower parts can the seismic performance of this type of structural form be better revealed; considering the influence of SSI effects will be closer to the actual seismic effects. Therefore, to identify the damage factors of the mid-story isolated stilted structures under earthquakes and provide optimized design plans for the structures, six models are established considering three slopes and two types of foundations based on the engineering case in Chongqing, China. Through the elastic-plastic time-history analysis under earthquakes in the down and transverse-slope directions, concludes, compared with not considering SSI, the seismic response of the mid-story isolated stilted structures considering SSI in mountainous areas is amplified. With the increase of the mountain slope, the seismic response of the structures considering SSI increases, and the amplification coefficients are between 1-1.8. The amplification coefficients of the structures without SSI are concentrated around 1, which is less influenced by the slope. The damage to the stilted isolated layer is mainly concentrated in the column and the beam end, and the maximum seismic response appears in the short columns. The foundation soil stress increases with the increase of the mountain slope.
Related Concept Videos
Posttensioned Masonry Walls
Post-tensioned masonry walls use high-strength steel rods or flexible tendons to enhance the strength and efficiency of masonry structures. These elements are securely anchored to the foundation and extend vertically either within the cores of the masonry units or between the masonry wythes. The construction process involves building the wall with these tensioning elements in place and allowing the mortar to fully cure.
Following the curing process, the tensioning begins. Steel rods are...
Types of Building Separation Joints
Volume-change joints address the effects of expansion and contraction due to temperature and moisture variations. They are strategically placed at discontinuities in a building's mass where cracking is most likely and are spaced about 150 to 200...
Effects of Creep
Stability of structures
Static Equilibrium - II
Indeterminate Structure

