Related Experiment Video
Updated: Jun 9, 2025

Author Spotlight: Process Development for the Spray-Drying of Probiotic Bacteria and Evaluation of the Product Quality
Published on: April 7, 2023
Fortification of milk powder with cashew apple juice using maltodextrin as a carrier material: A novel dairy recipe
Vinoth Kannan Sithu Rameshbabu1, Vivek Rangarajan1, Sampatrao Dagu Manjare1
1Department of Chemical Engineering Birla Institute of Technology and Science-Pilani, K.K. Birla Goa Campus Zuarinagar Goa India.
Abstract:
Food preservation and fortification pose significant challenges in the fruit and dairy sectors, particularly in developing regions with limited infrastructure and rising production volumes. Cashew apples, rich in antioxidants such as vitamin C and polyphenolic compounds, often go to waste due to their high perishability. In Goa, India, these discarded fruits are used to produce "Feni," an alcoholic beverage, but broader utilization strategies are still needed. This study introduces a novel approach to extend the shelf life of dairy products like milk powder and enhance their nutritional content by fortifying it with cashew apple juice (CAJ) through spray drying. In order to reduce moisture content during spray drying and to obtain a free-flowing powder of the final product, maltodextrin was added. Maltodextrin alters the adhesive properties of the fruit juice droplets on surfaces and facilitates the formulation of free-flowing powder. The key parameters including solubility, bulk density, and glass transition temperature, along with structural analyses such as X-ray diffraction, field emission scanning electron microscope, and Fourier transform infrared spectroscopy, were evaluated to compare the fortified CAJ milk powder with its commercial counterparts. Experiments determined optimal spray-drying conditions, achieving a free-flowing powder at inlet and outlet temperatures of 140 and 60°C, respectively, with a 7% maltodextrin concentration (18 DE). The resulting milk powder displayed a Tg value of 76.7 ± 2.3°C, falling within the acceptable range of 65 to 98°C, demonstrating the feasibility of this fortification method based on the spray-drying process parameters.

