Composite Learning Based Adaptive Control of Linear 2 × 2 Hyperbolic PDE Systems
Abstract:
This article considers the adaptive stability control of a class of linear hyperbolic PDE systems. The PDE model is subject to constant but in-domain and boundary unknown parameters. A novel adaptive controller is developed by leveraging the swapping design technique and composite parameter learning law. With swapping design, several linear and static combinations, including carefully designed filters, unknown parameters, and error terms, are constructed to express the system states. From the static combinations, a composite learning based forgetting-factor least squares law is introduced to guarantee exponential parameter convergence without the persistent excitation (PE). Although inaccurate parameter estimation in the adaptive backstepping control results in asymptotic stability of the system, accurate parameter estimation ensures the exponential convergence of closed-loop system and concomitantly improves the transient performance. Finally, a comparative numerical simulation is performed to validate the effectiveness and advantage of the developed adaptive control scheme.
More Related Videos
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
08:35Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
Related Concept Videos
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Classification of Systems-I
Homogeneity dictates that if an input x(t) is multiplied by a constant c, the output y(t) is multiplied by the same constant. Mathematically, this is expressed as:
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
