Related Experiment Video
Updated: Jun 9, 2025

Application of Lucilia sericata Larvae in Debridement of Pressure Wounds in Outpatient Settings
Published on: December 4, 2021
Timing of debridement: When to do it, and who should perform it?
Matilda Fr Powell-Bowns1, John F Keating1
1Royal Infirmary of Edinburgh, Edinburgh, Scotland, United Kingdom.
Abstract:
The timely and effective management of open fractures continues to be a challenge in modern orthopaedic practice. Lower limb high energy fractures with complex soft tissue injuries require multi-disciplinary care to achieve the best results. Despite an extensive published literature on open fractures, the timing of debridement and the most appropriate personnel to perform it continue to be a source of debate. National guidelines on the topic are few but they suggest immediate debridement for open fractures with highly contaminated wounds and debridement within 12 to 24 h is considered desirable for less contaminated wounds. There is actually limited evidence linking timing of debridement to infection risk but the largest studies recently published do indicate a link between delay to debridement and increasing infection risk. Most studies on management are based on a clinical model where the initial debridement and fixation are performed by an orthopaedic surgeon and if required delayed coverage and closure is subsequently carried out by a plastic surgeon. More recently, studies have proposed an alternative approach, with initial debridement and temporary fixation followed within 48 h with a further debridement, definitive fixation and flap cover with a combined orthoplastic team. Reported results have been favourable. This is a significant change in management and there are limited data at present to determine if this approach will improve results in the most complex open fractures.
Related Concept Videos
Tracheostomy Care II: Procedure
Step 1: Perform hand hygiene, and put on personal protective equipment: gown, gloves, mask...
Endocarditis III: Medical Management
Tracheostomy Care I: Pre-procedural Steps
Required Equipment
The equipment necessary for tracheostomy care includes:
Tracheostomy: Procedure and Tubes
Tracheostomy tubes can be made of semiflexible plastic (polyurethane or silicone), rigid plastic, or metal, and they come in...
Handwashing II: Pre-procedure and Initial Procedure Steps
The hand washing procedure itself includes the following steps. First, cover cuts, if any, on hands with a waterproof dressing. Cuts and abrasions can become contaminated with bacteria hindering the ability to clean the area thoroughly. In addition, repeated hand washing can worsen an injury. The nails must be short and clean, without nail...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...

