Related Experiment Video
Updated: Jun 8, 2025

Time Multiplexing Super Resolving Technique for Imaging from a Moving Platform
Published on: February 12, 2014
Sparsity-based direction-of-arrival estimation in the presence of near-field and far-field interferences for
Zhiyao Du1,2,3, Yu Hao1,2,3, Longhao Qiu1,2,3
1National Key Laboratory of Underwater Acoustic Technology, Harbin Engineering University, Harbin 150001, China.
Abstract:
For the sonar arrays mounted on an unmanned underwater vehicle (UUV), the direction-of-arrival (DOA) estimation of the far-field (FF) weak sources is influenced by the near-field (NF) interferences generated from the radiated self-noise of the UUV and the FF interferences simultaneously. To address the problem, a sparsity-based DOA estimation method resistant to the NF and FF interferences is proposed in this paper. This method isolates the FF signals from the NF signals by sparse reconstruction. Additionally, subspace projection is applied to address the masking problem of the weak target signal by the strong interferences in the spatial domain, effectively enhancing the capacity of estimating the DOA of the weak target signal in the presence of strong interferences. Numerical simulations and experimental results demonstrate the effectiveness of the proposed method. Compared to other advanced DOA estimation methods, the proposed method exhibits better DOA estimation performance in the presence of strong NF and FF interferences.
Related Concept Videos
Echo
Imagine the sound is reflected back to the ears. Assuming that the source is very close to the human, the difference between hearing the two sounds—the emitted sound and the reflected sound—may be more than the minimum time for perceiving distinct sounds. If this is the case,...
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...

