Experimental Assessment of Corrosion Properties for Materials Intended for Heavy Crude Processing

Heavy crude oil processing presents significant challenges owing to its complex composition and requirement for processing conditions, which increase the process safety risk in crude processing units, such as fixed equipment, for instance pressure vessels and pipes. The aim of this work is to evaluate the influence of heavy crude oils named A and B and the effect of sulfur-rich compounds and organic acids on the performance at high temperatures of three metallic alloys (5Cr-1/2Mo/ASTM A335GP5, X6CrNiMoTi17122/AISI-SAE 316Ti and Ni66.5Cu31.5/Monel 400) and propose an alternative to be used in pressure vessels and piping in refineries. This work was based on the need to understand the corrosivity of two heavy crude oils (A and B) from eastern Colombia in three materials, evaluated at three temperatures (200 °C, 250 °C and 300 °C) under the same conditions of pressure (200 psi) and rotation velocity (600 rpm) in a dynamic autoclave to simulate atmospheric conditions and conditions in vacuum refinery towers. An understanding of how these factors interact with the fundamental principles of corrosion kinetics is essential for developing an effective corrosion mitigation strategy. The results were interesting for applications requiring high corrosion resistance. X6CrNiMoTi17122/AISI-SAE 316Ti is a solid candidate for this application, with corrosion rates of 0.2 to 0.87 mpy. Ni66.5Cu31.5/Monel 400 exhibited significant corrosion rates up to 74.89 mpy, especially at higher temperatures (300 °C). 5Cr-1/2Mo/ASTM A335GP5 showed a generally moderate corrosion rate (2.04-5.57 mpy) in the evaluated temperature range.