Effects of interface-engineering on the internal structure and reflective characteristics of Cr/Sc multilayer mirrors
Optics Express
|November 14, 2024
Abstract:
Record reflectivity's of REXP=23.8% at 3.14 nm and RCALC=30.8% at 3.12 nm have been obtained for Cr/Sc mirrors. Such increases in reflection are the result of decreases in mixing of the system layers with each other due to the use of interface-engineering methods - passivation of the already deposited Cr layer with nitrogen before deposition of the subsequent Sc layer. However, it has been found that adding additional B4C layers to such a system leads to a decrease in reflectivity.
Related Concept Videos
01:26Phase Contrast and Differential Interference Contrast Microscopy
9.4K
Phase-Contrast Microscopes
In-phase-contrast microscopes, interference between light directly passing through a cell and light refracted by cellular components is used to create high-contrast, high-resolution images without staining. It is the oldest and simplest type of microscope that creates an image by altering the wavelengths of light rays passing through the specimen. Altered wavelength paths are created using an annular stop in the condenser. The annular stop produces a hollow cone of...
In-phase-contrast microscopes, interference between light directly passing through a cell and light refracted by cellular components is used to create high-contrast, high-resolution images without staining. It is the oldest and simplest type of microscope that creates an image by altering the wavelengths of light rays passing through the specimen. Altered wavelength paths are created using an annular stop in the condenser. The annular stop produces a hollow cone of...
9.4K
01:05Total Internal Reflection Fluorescence Microscopy
11.0K
Total internal reflection fluorescence microscopy or TIRF is an advanced microscopic technique used to visualize fluorophores in samples close to a solid surface with a higher refractive index, such as a glass coverslip. TIRF only allows fluorophores in proximity to the solid surface to be excited. When light from a medium with a lower refractive index (such as air) hits the glass coverslip at a critical angle, the light undergoes total internal reflection stead of passing through the glass.
11.0K