Strontium-Substituted Nanohydroxyapatite Containing Biodegradable 3D Printed Composite Scaffolds for Bone...

Treatment of large-size bone defects is difficult, and acquiring autografts may be challenging due to limited availability. A synthetic patient-specific bone substitute can be developed by using 3D printing technologies in such cases. In the present study, we have developed photocurable composite resins with poly(trimethylene carbonate) (PTMC) containing a high percentage of biodegradable bioactive strontium-substituted nanohydroxyapatite (SrHA, size 30-70 nm). These photocurable resins have then been employed to develop high-surface-area 3D-printed bone substitutes using the digital light processing (DLP) technique. To enhance the surface area of the 3D-printed substitute, cryogels alone and functionalized with bioactive components of bone morphogenetic protein (BMP) and zoledronic acid (ZA) were filled within the 3D-printed scaffold/substitute. The scaffolds were tested in vitro for biocompatibility and functionality in vivo in two therapeutically relevant rat models with large bone defects (4 mm). The porosities of 3D printed scaffolds were found to be 60.1 ± 0.9%, 72.9 ± 0.5%, and 74.3 ± 1.6% for PTMC, PTMC-HA, and PTMC-SrHA, respectively, which is in the range of cancellous bone (50-95%). The thermogravimetric analysis demonstrated the fabrication of 3D printed composites with HA and SrHA concentrations of 51.5 and 57.4 wt %, respectively, in the PTMC matrix. The tensile Young's modulus (E), compressive moduli, and wettability increased post incorporation of SrHA and HA in the PTMC matrix. In vitro and in vivo results revealed that SrHA integrated into the PTMC matrix exhibited good physicochemical and biological properties. Furthermore, the osteoactive molecule-functionalized 3D printed composite scaffolds were found to have an adequate osteoconductive and osteoinductive surface that has shown increased bone regeneration and defect repair in both tibial and cranial bone defects. Our findings thus support the use of PTMC-SrHA composites as next-generation patient-specific synthetic bioactive biodegradable bone substitutes.