Optimization of sandstone processing waste, electric arc furnace slag, and fly ash-based ternary blended eco-friendly...

Over the years, ordinary Portland cement (OPC) has been used to meet growing demands of land and housing facilities arising out of population overburdens. It is well documented that OPCs, besides their outstanding qualities as building materials, are also significant contributors to global greenhouse gases (GHG). Consequently, recent years have noticed an emerging interest in the search for alternatives to Portland cement-based binders. Geopolymers are well-suited to serve this purpose owing to their superior attributes and low CO₂ emissions compared to conventional cement. Still, the industrialization of geopolymers has not reached a meaningful value due to the prevailing fundamental barriers involving the requirement of corrosive environments and intensive heat-curing regimes in post-fabrication processes. The current study investigates the viability of using synergistic mixtures based on stone residues, pulverized ash, and steel slags in fabricating geopolymer composites cured at ambient temperature with reduced ingestion of alkalis. A comprehensive assessment of the engineering, mineralogical, and microstructural characteristics was performed in terms of setting times, physico-mechanical, durability, non-destructive, and analytical tests. Further, a scaled-down approach was utilized to evaluate the feasibility of the designed composites as construction entities. The incorporation of SW (10-40%) prolonged the setting periods (~ 150 min.) and abridged the engineering properties of the ternary pastes collectively by 127% due to silica coalescences. Besides, replacements of stone residues with FA (20-30%) and EAF (30-60%) improved the blend performance due to Ca and Al assimilations. All the developed composites satisfied the acclamations for OPC grade 33, CEM V class 32.5N, and OPC Type - I suggested by IS, EN, and ASTM standards, respectively, with matrices constituting CASH-CSH-NASH-(N,C)-A-S-H type gelation complexes identified by the X-ray, infrared, and electron imaging spectroscopic analysis. In addition, a cumulative deficit of about 60-90% was observed in energy and carbon footprints relative to OPCs, indicative of the binders' sustainability traits.