Combination of In Situ Diffraction Experiments and Acoustic Emission Testing to Understand Compression Behavior of...

The compressive deformation of the extruded binary Mg-Gd with gadolinium in solid solution has been studied in situ by combining synchrotron diffraction and acoustic emission techniques during compression tests. These two techniques are useful in investigating the evolution of twinning in all its stages. The extruded bars develop a fiber texture with the basal plane parallel to the extrusion direction. Moreover, the quenching of the magnesium bars immediately after the extrusion process ensured the production of the solid solution of gadolinium in the magnesium matrix. The solid solution of gadolinium solute atoms is the main strengthening mechanism of alloys and has a strong influence in plastic deformation. Tensile twinning controls the macroscopic yielding under compressive modes, although the activation of basal and non-basal dislocation systems has been also detected by in situ techniques. The presence of gadolinium atoms in solid solution tends to inhibit tensile twinning and, therefore, the twin volume fraction decreases with the increase in the gadolinium content. The compressive work hardening curve shows a maximum peak at intermediate plastic strain which is related to the interaction of dislocations within twins. The maximum value and the position of the peak decreases with the increase in the gadolinium content.