Related Experiment Video
Updated: Jun 6, 2025

Quantitative Detection of Trace Explosive Vapors by Programmed Temperature Desorption Gas Chromatography-Electron Capture Detector
Published on: July 25, 2014
Discerning Emittable from Extractable Chemicals Identified in Consumer Products by Suspect Screening GCxGC-TOFMS
William D Watson1, Jake A Janssen1, Michael J Hartnett1
1Southwest Research Institute, San Antonio, Texas 78238, United States.
Abstract:
Characterization of chemicals in household products is important for understanding this potential source of chemical exposure. Increasingly, suspect screening and nontargeted analysis techniques are used to characterize as many chemical signatures as possible. Solids such as household products are most conveniently prepared using solvent extraction, revealing what chemicals are contained within the product matrix but providing no information about the potential of those chemicals to leave the matrix and cause actual exposure. In this work, the profile and relative abundances of "extractable" chemical signatures found after solvent extraction are compared to those "emittable" to the headspace for 81 household products analyzed by two-dimensional gas chromatography time-of-flight mass spectrometry. This study retrospectively fuses data collected in separate efforts over 3.8 years and 13 analytical batches. Management of the data is made possible by recent developments in processing systems for complex data such as Highlight. Compounds were generically classified as aromatic heteroatom, aromatic hydrocarbon, glycol, hydrocarbon, long chain heteroatom, nonaromatic heteroatom, and unknown/unclassified. Class-based retention time and abundance trends were observed. Liquid extraction resulted in the greatest number of features and the highest relative abundances, while low temperature emission conditions produced the smallest number of features and lowest relative abundances.
More Related Videos
05:31Gas Chromatography-Mass Spectrometry Paired with Total Vaporization Solid-Phase Microextraction as a Forensic Tool
Published on: May 25, 2021
09:04Identifying Per- and Polyfluorinated Chemical Species with a Combined Targeted and Non-Targeted-Screening High-Resolution Mass Spectrometry Workflow
Published on: April 18, 2019
Related Concept Videos
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
High-Performance Liquid Chromatography: Types of Detectors
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...