Transparent Zinc Oxide Memristor Structures: Magnetron Sputtering of Thin Films, Resistive Switching Investigation,...

This paper presents the results of experimental studies of the influence of high-frequency magnetron sputtering power on the structural and electrophysical properties of nanocrystalline ZnO films. It is shown that at a magnetron sputtering power of 75 W in an argon atmosphere at room temperature, ZnO films have a relatively smooth surface and a uniform nanocrystalline structure. Based on the results obtained, the formation and study of resistive switching of transparent ITO/ZnO/ITO memristor structures as well as a crossbar array based on them were performed. It is demonstrated that memristor structures based on ZnO films obtained at a magnetron sputtering power of 75 W exhibit stable resistive switching for 1000 cycles between high resistance states (HRS = 537.4 ± 26.7 Ω) and low resistance states (LRS = 291.4 ± 38.5 Ω), while the resistance ratio in HRS/LRS is ~1.8. On the basis of the experimental findings, we carried out mathematical modeling of the resistive switching of this structure, and it demonstrated that the regions with an increase in the electric field strength along the edge of the upper electrode become the main sources of oxygen vacancy generation in ZnO film. A crossbar array of 16 transparent ITO/ZnO/ITO memristor structures was also fabricated, demonstrating 20,000 resistive switching cycles between LRS = 13.8 ± 1.4 kΩ and HRS = 34.8 ± 2.6 kΩ for all devices, with a resistance ratio of HRS/LRS of ~2.5. The obtained results can be used in the development of technological processes for the manufacturing of transparent memristor crossbars for neuromorphic structures of machine vision, robotics, and artificial intelligence systems.