A Novel Technique for Monitoring Carbonate and Scale Precipitation Using a Batch-Process-Based Hetero-Core Fiber...

Techniques for monitoring calcium carbonate and silica deposits (scale) in geothermal power plants and hot spring facilities using fiber optic sensors have already been reported. These sensors continuously measure changes in light transmittance with a detector and, when applied to field tests, require the installation of a power supply and sensor monitoring equipment. However, on some sites, a power supply may not be available, or a specialist skilled in handling scale sensors is required. To overcome this problem, we have developed a method for evaluating scale formation that is based on a batch process that can be used by anyone. In brief, this method involves depositing scale on a section of the optical fiber sensor and then fusing this section to the optical fiber and measuring it. Using this sensor, a technician in the field can simply place the sensor in the desired location, collect the samples at any given time, and send them to the laboratory to measure their transmittance. This simple and easy method was achieved by using a hetero-core type of fiber optic. This evaluation method can measure with the same sensitivity as conventional real-time methods, while its transmittance response for the sensor corresponds to the saturation index (SI) changes in the scale components in the solution due to increases in temperature and concentration. In the field of carbon dioxide capture and storage (CCS), this evaluation method can be used to quantitatively measure the formation of carbonate minerals, and it can also be used as an indicator for determining the conditions for CO₂ mineral fixation, as well as in experiments using batch-type autoclaves in laboratory testing. It is also expected to be used in geothermal power plants as a method for evaluating scale formation, such as that of amorphous silica, and to protect against agents that hinder stable operation.