Related Experiment Video
Updated: Jun 4, 2025

Simulating Imaging of Large Scale Radio Arrays on the Lunar Surface
Published on: July 30, 2020
COSMIC-2 RFI Prediction Model Based on CNN-BiLSTM-Attention for Interference Detection and Location
Cheng-Long Song1,2, Rui-Min Jin2,3, Chao Han1
1School of Electronic Information Engineering, Shandong University of Science and Technology, Qingdao 266590, China.
Abstract:
As the application of the Global Navigation Satellite System (GNSS) continues to expand, its stability and safety issues are receiving more and more attention, especially the interference problem. Interference reduces the signal reception quality of ground terminals and may even lead to the paralysis of GNSS function in severe cases. In recent years, Low Earth Orbit (LEO) satellites have been highly emphasized for their unique advantages in GNSS interference detection, and related commercial and academic activities have increased rapidly. In this context, based on the signal-to-noise ratio (SNR) and radio-frequency interference (RFI) measurements data from COSMIC-2 satellites, this paper explores a method of predicting RFI measurements using SNR correlation variations in different GNSS signal channels for application to the detection and localization of civil terrestrial GNSS interference signals. Research shows that the SNR in different GNSS signal channels shows a correlated change under the influence of RFI. To this end, a CNN-BiLSTM-Attention model combining a convolutional neural network (CNN), bi-directional long and short-term memory network (BiLSTM), and attention mechanism is proposed in this paper, and the model takes the multi-channel SNR time series of the GNSS as the input and outputs the maximum measured value of RFI in the multi-channels. The experimental results show that compared with the traditional band-pass filtering inter-correlation method and other deep learning models, the model in this paper has a root mean square error (RMSE), mean absolute error (MAE), and correlation coefficient (R2) of 1.0185, 1.8567, and 0.9693, respectively, in RFI prediction, which demonstrates a higher RFI detection accuracy and a wide range of rough localization capabilities, showing significant competitiveness. Since the correlation changes in the SNR can be processed to decouple the signal strength, this model is also suitable for future GNSS-RO missions (such as COSMIC-1, CHAMP, GRACE, and Spire) for which no RFI measurements have yet been made.
Related Concept Videos
Atomic Emission Spectroscopy: Interference
Atomic Absorption Spectroscopy: Interference
Spectral interference occurs when signals from other elements or molecules overlap with the analyte signal, falsely elevating or masking the analyte's absorbance. This interference can be corrected using Zeeman,...
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Sound Waves: Interference
¹³C NMR: ¹H–¹³C Decoupling
A broadband decoupling technique is used to simplify these complex, sometimes overlapping, signals. Broadband decoupling relies on a...

