Related Experiment Video
Updated: May 8, 2025

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator
Published on: February 14, 2025
Advanced control strategy for AC microgrids: a hybrid ANN-based adaptive PI controller with droop control and virtual
Sarra Adiche1, Mhamed Larbi1, Djilali Toumi1
1Department of Electrical Engineering, L2GEGI Laboratory, University of Tiaret, Tiaret, 14000, Algeria.
Abstract:
In this paper, an improved voltage control strategy for microgrids (MG) is proposed, using an artificial neural network (ANN)-based adaptive proportional-integral (PI) controller combined with droop control and virtual impedance techniques (VIT). The control strategy is developed to improve voltage control, power sharing and total harmonic distortion (THD) reduction in the MG systems with renewable and distributed generation (DG) sources. The VIT is used to decouple active and reactive power, reduce negative power interactions between DG's and improve the robustness of the system under varying load and generation conditions. Simulation findings under different tests have shown significant improvements in performance and computational simulation. The rise time is reduced by 60%, the overshoot is reduced by 80%, the THD of the voltage is reduced by 75% (from 0.99 to 0.20%), and the THD of the current is reduced by 69% (from 10.73 to 3.36%) compared to the conventional PI controller technique. Furthermore, voltage and current THD values were maintained below the IEEE-519 standard limits of 5% and 8%, respectively, for the power quality enhancement. Fluctuations in voltage and frequency were also maintained at 2% tolerance and 1% tolerance, respectively, across all voltage limits, which is consistent with international norms. Power-sharing errors were reduced by 50% after conducting the robustness tests against the DC supply and load disturbances. In addition, the proposed strategy outperforms the previous control techniques presented at the state of the art in terms of adaptability, stability and, especially, the ability to reduce the THD, which validates its effectiveness for MG systems control and optimization under uncertain conditions.
Related Concept Videos
PI Controller: Design
PID Controller
Time and frequency -Domain Interpretation of PI Control
Acting as a low-pass filter, the PI controller slows the system's response and extends settling times. This requires...
Load-frequency control
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...

