Experimental Investigation of the Effect of Microstructure on Coalbed Methane Adsorption Characteristics Affected by...

Coalbed methane (CBM) reservoir modification based on chemical solvent treatment could change the coal microstructure, which further affects the adsorption capacity and flow characteristics of this clean energy. Coal samples were extracted by tetrahydrofuran (THF), carbon disulfide (CS₂), and hydrochloric acid (HCl). Low-pressure nitrogen adsorption, carbon dioxide adsorption, Fourier transform infrared spectroscopy, and methane isothermal adsorption test were adopted. The variations of pore structure and chemical composition in coal were evaluated by density functional theory, Barrett-Joyner-Halenda model, and peak fitting method, and their impacts on methane adsorption characteristics were studied. Results show that (1) the micropores less than 2 nm show a bimodal distribution. After acidification, micropore specific surface areas of coal samples I and II increase by 16.79% and 11.72%, respectively, while that of coal sample III-HCl decreases by 4.29% closely related to carbonate and silicate minerals in coal. Microporous specific surface areas of sample II-CS₂ and III-CS₂ affected by solvent rise by 4.28% and 4.17%, respectively. (2) Among the three original coal samples, the highest level of OH-OH hydrogen bonds content is observed. Solvents have a tendency to interact with -CH₂ groups, which shorten the length of fat chains and increase the number of branched chains. THF tends to dissolve C-O-C groups and carbonyl C═O groups. Following CS₂ treatment, samples II and III show 38.42% and 47.76% decrease in aromatic C═C area, respectively. (3) The methane adsorption capability in three coal samples is I > III > II. Except for sample I-HCl and sample III-THF, other coal samples have a lower methane adsorption capability than raw coal. Methane adsorption is reduced not just by a decrease in the number of micropores but also by aliphatic groups, aromatic structures, and oxygen-containing structures. Relevant results could deliver guiding significance for understanding methane adsorption and flow characteristics in coal after chemical solvent modification.