Related Experiment Video
Updated: Jun 3, 2025

Automated Deployment of an Internet Protocol Telephony Service on Unmanned Aerial Vehicles Using Network Functions Virtualization
Published on: November 26, 2019
Joint User Association, Power Allocation and Beamforming for NOMA-Based Integrated Satellite-Terrestrial Networks
Peizhe Xin1, Zihao Fu1, Zhiyi Chen1
1State Grid Economic and Technological Research Institute Co., Ltd., 102209 Beijing, China.
Abstract:
This paper investigated a non-orthogonal multiple access (NOMA)-based integrated satellite-terrestrial network (ISTN), where each user can select to access a terrestrial base station (BS) or the satellite according to the capacity of BS and their individual transmission requirements. A two-stage algorithm is proposed to solve the achievable sum rate maximizing resource optimization problem. In the first stage, user associations are determined based on individual preference lists and the backhaul capacities of the access points (APs). In the second stage, the power allocation, and the receiving beamforming vectors are optimized alternately. Within each iteration, the closed-form solution for the transmit power is derived. Simulation results show the effectiveness of the proposed algorithm and the benefits brought by NOMA. When the backhaul link capacity of terrestrial BSs is sufficient, users (UEs) prefer to access these BSs. Otherwise, the satellite can offer QoS guarantees to UEs. Furthermore, the overall system performance reaches its optimum when the number of UEs in the system matches the number of receive antennas at the APs.
Related Concept Videos
Maximum Power Transfer
By substituting the entire circuit with...
Transmission Line Design Considerations
Beams with Symmetric Loadings
The M/EI...
Types of Global Positioning System Surveys
Beams with Unsymmetric Loadings
The first moment-area theorem determines the slope at any point on the beam. This theorem indicates that the change in slope between two points on a beam...
The Maximum Power Transfer Theorem
The load connected draws the current, and the circuit delivers the power to the load. The alternating current flowing through the load is determined using the rectangular form of voltages, currents, network impedance, and load impedance. The average power delivered to the load is obtained from the product of the square of current and load resistance.

