Preparation and Performance Study of Novel Foam Vegetation Concrete

Vegetation concrete is one of the most widely used substrates in ecological slope protection, but its practical application often limits the growth and nutrient uptake of plant roots due to consolidation problems, which affects the effectiveness of slope protection. This paper proposed the use of a plant protein foaming agent as a porous modifier to create a porous, lightweight treatment for vegetation concrete. Physical performance tests, direct shear tests, plant growth tests, and scanning electron microscopy experiments were conducted to compare and analyze the physical, mechanical, microscopic characteristics, and phyto-capabilities of differently treated vegetation concrete. The results showed that the higher the foam content, the more significant the porous and lightweight properties of the vegetation concrete. When the foam volume was 50%, the porosity increased by 106.05% compared to the untreated sample, while the volume weight decreased by 20.53%. The shear strength, cohesion, and internal friction angle of vegetation concrete all showed a decreasing trend with increasing foaming agent content. Festuca arundinacea grew best under the 30% foaming agent treatment, with germinative energy, germinative percentage, plant height, root length, and underground biomass increasing by 6.31%, 13.22%, 8.57%, 18.71%, and 34.62%, respectively, compared to the untreated sample. The scanning electron microscope observation showed that the pore structure of vegetation concrete was optimized after foam incorporation. Adding plant protein foaming agents to modify the pore structure of vegetation concrete is appropriate, with an optimal foam volume ratio of 20-30%. This study provides new insights and references for slope ecological restoration engineering.