Related Experiment Video
Updated: Jun 3, 2025

Automated Deployment of an Internet Protocol Telephony Service on Unmanned Aerial Vehicles Using Network Functions Virtualization
Published on: November 26, 2019
UAV Trajectory Control and Power Optimization for Low-Latency C-V2X Communications in a Federated Learning
Xavier Fernando1, Abhishek Gupta1
1Department of Electrical, Computer and Biomedical Engineering, Toronto Metropolitan University, Toronto, ON M5B2K3, Canada.
Abstract:
Unmanned aerial vehicle (UAV)-enabled vehicular communications in the sixth generation (6G) are characterized by line-of-sight (LoS) and dynamically varying channel conditions. However, the presence of obstacles in the LoS path leads to shadowed fading environments. In UAV-assisted cellular vehicle-to-everything (C-V2X) communication, vehicle and UAV mobility and shadowing adversely impact latency and throughput. Moreover, 6G vehicular communications comprise data-intensive applications such as augmented reality, mixed reality, virtual reality, intelligent transportation, and autonomous vehicles. Since vehicles' sensors generate immense amount of data, the latency in processing these applications also increases, particularly when the data are not independently identically distributed (non-i.i.d.). Furthermore, when the sensors' data are heterogeneous in size and distribution, the incoming packets demand substantial computing resources, energy efficiency at the UAV servers and intelligent mechanisms to queue the incoming packets. Due to the limited battery power and coverage range of UAV, the quality of service (QoS) requirements such as coverage rate, UAV flying time, and fairness of vehicle selection are adversely impacted. Controlling the UAV trajectory so that it serves a maximum number of vehicles while maximizing battery power usage is a potential solution to enhance QoS. This paper investigates the system performance and communication disruption between vehicles and UAV due to Doppler effect in the orthogonal time-frequency space (OTFS) modulated channel. Moreover, a low-complexity UAV trajectory prediction and vehicle selection method is proposed using federated learning, which exploits related information from past trajectories. The weighted total energy consumption of a UAV is minimized by jointly optimizing the transmission window (Lw), transmit power and UAV trajectory considering Doppler spread. The simulation results reveal that the weighted total energy consumption of the OTFS-based system decreases up to 10% when combined with federated learning to locally process the sensor data at the vehicles and communicate the processed local models to the UAV. The weighted total energy consumption of the proposed federated learning algorithm decreases by 10-15% compared with convex optimization, heuristic, and meta-heuristic algorithms.
More Related Videos
Related Concept Videos
Fast Decoupled and DC Powerflow
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Maximum Power Transfer
By substituting the entire circuit with...
Control Systems: Applications
In modern vehicles, control systems manage various functions to enhance performance and safety. The steering wheel and accelerator are primary inputs in a car's control system. The...
Reducing Line Loss
With a step-up transformer at the source, the voltage is increased, thereby reducing the current in the transmission lines since power loss...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...

