Related Experiment Video
Updated: May 31, 2025

Characterization of Thermal Transport in One-dimensional Solid Materials
Published on: January 26, 2014
Effect of Temperature on Condensed State Structure and Conductivity Characteristics of Micron-Level Biaxially
Zixuan Zhao1, Geng Chen1, Yujing Tong1
1State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 102206, China.
Abstract:
Polymer-based dielectric films are increasingly demanded for devices under high electric fields used in new energy vehicles, photovoltaic grid connections, oil and gas exploration, and aerospace. However, leakage current is one of the significant factors limiting the improvement of the insulation performance. This paper tested the leakage current and condensed state structure characteristics of biaxially oriented polypropylene (BOPP) films and obtained the nonlinear characteristics of leakage current of BOPP films in the range of 40-440 V/μm and 40-110 °C. The conduction mechanisms of BOPP films are hopping conductivity within 40-120 V/μm and the Poole-Frenkel effect within 120-440 V/μm, and the threshold electric field of the two kinds conduction mechanisms decreases from 120 to 80 V/μm above 70 °C. The in situ FTIR results indicate that the structure of the BOPP films including band structure, amorphous phase, and isotacticity indices changes above 70 °C, corresponding to the threshold electric field of both conductivity mechanisms gradually decreasing from 120 to 80 V/μm at 70 °C. This study can provide guidance for the optimization design to suppress the leakage current of BOPP and improve its insulation performance.
More Related Videos
09:32Cooling Rate Dependent Ellipsometry Measurements to Determine the Dynamics of Thin Glassy Films
Published on: January 26, 2016
08:00Chemical Synthesis of Porous Barium Titanate Thin Film and Thermal Stabilization of Ferroelectric Phase by Porosity-Induced Strain
Published on: March 27, 2018
Related Concept Videos
Polymer Classification: Stereospecificity
Polymer Classification: Architecture
Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
¹H NMR of Conformationally Flexible Molecules: Variable-Temperature NMR
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility
Temporary attractive forces like dispersion are present in all molecules, whether they are polar or nonpolar. They...