Influences of Infrared Dye Content and Laser Energy Density on Laser Propulsion Performance of ADN-Based Liquid...

Ammonium dinitramide (ADN) is a new green oxidant, which is a kind of high-energy ionic liquid and has been widely used in the field of liquid propulsion. When it is used in laser plasma propulsion, its poor absorption coefficient significantly limits its application. To address the issue, this paper investigates the effects of the content of the infrared dye and the laser energy density on the laser propulsion performance of an ADN-based liquid propellant. The performance of the liquid propellant was tested by the light absorption performance test system and the micro-impulse test system. The results show that the addition of infrared dye can significantly improve the light absorption performance of the liquid matrix. As the content of the infrared (IR) dyes increases from 0.3 wt.% to 0.6 wt.%, the absorption coefficient of the ADN-based liquid propellant increases from 248.84 cm^-1 to 463.85 cm^-1, and the absorption depth decreases from 40.20 μm to 21.56 μm. At a laser energy density of 21.60 J·cm^-1, when the IR dye content increases from 0.3 wt.% to 0.6 wt.%, the specific impulse increases from 26.43 s to 54.43 s and the ablation efficiency increases from 4.32% to 18.21%. Significantly luminous plasma appears in the ablation plume at higher laser energy densities, accompanied by higher-velocity plasma shock waves. Compared to the factor of the infrared dye content, the laser energy density contributes more to the ablation efficiency, especially when the increase in laser energy density promotes the full release of chemical energy from the liquid propellant, which, in turn, also enhances the impulse, impulse coupling coefficient, and the plasma detonation velocity. The results provide an important reference for the design of an energy-containing liquid propellant.