Related Experiment Video
Updated: May 31, 2025

Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
ESO-Based Non-Singular Terminal Filtered Integral Sliding Mode Backstepping Control for Unmanned Surface Vessels
Jianping Yuan1,2,3,4, Zhuohui Chai1, Qingdong Chen1
1Naval Architecture and Shipping College, Guangdong Ocean University, Zhanjiang 524091, China.
Abstract:
Aiming at the control challenges faced by unmanned surface vessels (USVs) in complex environments, such as nonlinearities, parameter uncertainties, and environmental perturbations, we propose a non-singular terminal integral sliding mode control strategy based on an extended state observer (ESO). The strategy first employs a third-order linear extended state observer to estimate the total disturbances of the USV system, encompassing both external disturbances and internal nonlinearities. Subsequently, a backstepping sliding mode controller based on the Lyapunov theory is designed to generate the steering torque control commands for the USV. To further enhance the tracking performance of the system, we introduce a non-singular terminal integral sliding mode surface with a double power convergence law and redesign the backstepping sliding mode controller for the USV heading control. Meanwhile, to circumvent the differential explosion issue in traditional backstepping control, we simplify the controller design by utilizing a second-order sliding mode filter to accurately estimate the differential signals of the virtual control quantities. Theoretical analysis and simulation results demonstrate that the proposed control algorithm improves the convergence speed, adaptive ability, and anti-interference ability in complex environments compared to traditional linear backstepping sliding mode control, thereby enhancing its engineering practicability. This research offers a more efficient and reliable method for precise heading control and path tracking of USVs in complex and dynamic environments.
More Related Videos
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Multi-input and Multi-variable systems
In the absence...
PI Controller: Design
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Control Systems
At the heart...
Root-Locus Method
This system can be represented by a block...