Dynamic Responses and Crack Propagation of Rock with Crossed Viscoelastic Joints Under Blasting Loads

To investigate the propagation of stress waves in viscoelastic joints under blasting loads, and their impact on crack propagation and dynamic response in rock masses, a numerical model incorporating intersecting viscoelastic joints was developed using LS-DYNA. This study focuses on the influence of various joint geometric parameters, including thickness and angle, on stress wave propagation and damage patterns in rock. The Riedel-Hiermaier-Thoma (RHT) model was employed to simulate the dynamic behavior of rock, while the Poynting-Thomson model was used to describe the viscoelastic properties of the joint fillings. The simulation results provide detailed insights into the principal stress, displacement, and particle vibration velocity around the joints. Based on the stress wave propagation theory, the velocity transmission coefficients were calculated to quantify the attenuation of stress waves across the joints. The findings demonstrate that viscoelastic joint properties significantly affect the damage patterns in the rock mass. Specifically, the area of the crushed zone and the width of cracks on the blasting side are proportional to joint thickness, while crack propagation at the joint tips is governed by differences in principal stress. Moreover, the propagation of vibration velocity is notably weakened at the second joint, highlighting the critical role played by joint characteristics in stress wave dynamics. These results underscore the complex interaction between joint properties and stress wave behavior in rock masses, providing valuable insights for optimizing blasting designs and improving the safety of underground engineering projects.