Related Experiment Video
Updated: May 26, 2025

Breathing-controlled Electrical Stimulation BreEStim for Management of Neuropathic Pain and Spasticity
Published on: January 10, 2013
[Development of Non-Invasive Bi-Level Breathing Therapy System]
Zhiying Yuan1,2, Mingyue Li1,2, Jieying Shan1,2
1School of Biomedical Engineering, Health Science Center, Shenzhen University, Shenzhen, 518060.
A new non-invasive bi-level breathing system for obstructive sleep apnea hypopnea syndrome (OSAHS) was developed. This home-use device enhances patient-ventilator synchrony, offering a promising alternative to traditional mechanical ventilation.
Area of Science:
- Biomedical Engineering
- Respiratory Medicine
- Medical Device Development
More Related Videos
08:34Investigation into Deep Breathing through Measurement of Ventilatory Parameters and Observation of Breathing Patterns
Published on: September 16, 2019
09:31Normothermic Negative Pressure Ventilation Ex Situ Lung Perfusion: Evaluation of Lung Function and Metabolism
Published on: February 14, 2022
Related Concept Videos
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Mechanical Ventilation I: Indication and Settings