Construction of a 'Simple, Fast and Accurate' Evaluation Method for Profile Control and Plugging Effect of Gel...

At present, the evaluation perspective of the gel plugging agent assessment method is incomprehensive, due to which the experimental results deviate from the field data. By analyzing the current indoor evaluation methods and the factors controlling the sealing capability of gel plugging agents, an experimental device and method for evaluating the blocking effect of oilfield gel plugging agents has been designed. In contrast to traditional assessment methods, the proposed approach offers advantages such as simple operation, rapid experimentation, and accurate results. The experimental results show that gels selected using conventional methods are inconsistent with the results of plugging displacement tests. This discrepancy can be attributed to the fact that these methods focus solely on cohesive strength while neglecting adhesive strength. Considering that the evaluation perspective of conventional methods is relatively limited, an evaluation method for the sealing effect of the plugging agent was developed. This method comprehensively incorporates factors such as cohesion strength, adhesion capability, shear resistance, and the long-term anti-dehydration performance of the gel. The evaluation results of the method were consistent with the results of the plugging displacement experiments. The newly constructed method defines Γ as the comprehensive evaluation parameter for the gel. A new experimental system with a comprehensive evaluation index (Γ) of 8.97 Pa² was selected. After the profile control of the system, the effluent ratio of the high and low permeability layers reached 1:9, and its erosion resistance was greater than 20 PV. Meanwhile, the profile control effect was also stable. Through verification based on field data, the injection pressure of the system optimized by the proposed method was found to be 2.5 times higher than that of the original system. Meanwhile, the plugging validity period was >2 times of the original system. The test results were consistent with the plugging capability evaluation index. In summary, the performance evaluation method of the designed gel plugging agent was reasonable in principle and the results were accurate and reliable. Therefore, it is considered to be of guiding significance for the selection of efficient profile control plugging agents in oilfields.