Dual-Band 802.11 RF Energy Harvesting Optimization for IoT Devices with Improved Patch Antenna Design and Impedance...

This paper investigates the feasibility of harvesting Radio Frequency (RF) energy from the Wi-Fi frequency band to power low-power Internet-of-Things (IoT) devices. With the increasing prevalence of IoT applications and wireless sensor networks (WSNs), there is a critical need for sustainable energy sources that can extend the operational lifespan of these devices, particularly in remote locations, where access to reliable power supplies is limited. The paper describes the design, simulation, and fabrication of a dual-band antenna capable of operating at 2.4 GHz and 5 GHz, the frequencies used by Wi-Fi. The simulation and experimental results show that the proposed design is efficient based on the reflection coefficient. Using a high-frequency simulator, we developed two C-shaped and an F-shaped microstrip antenna design, optimized for impedance matching and efficient RF-DC conversion.The captured RF energy is converted into usable electrical power that can be directly utilized by low-power IoT devices or stored in batteries for later use. The paper introduces an efficient design for dual-band antennas to maximize the reception of Wi-Fi signals. It also explains the construction of an impedance-matching network to reduce signal reflection and improve power transfer efficiency. The results indicate that the proposed antennas can effectively harvest Wi-Fi energy, providing a sustainable power source for IoT devices. The practical implementation of this system offers a promising solution to the energy supply challenges faced by remote and low-power IoT applications, paving the way for more efficient and longer-lasting wireless sensor networks.