Related Experiment Video
Updated: May 22, 2025

Carrier Lifetime Measurements in Semiconductors through the Microwave Photoconductivity Decay Method
Published on: April 18, 2019
High-Breakdown and Low-Leakage 4H-SiC MOS Capacitor Based on HfO2/SiO2 Stacked Gate Dielectric in Trench Structures
Qimin Huang1,2,3, Yunduo Guo1,2,3, Anfeng Wang1,2,3
1Institute of Wide Bandgap Semiconductors and Future Lighting, Academy for Engineering & Technology, Fudan University, Shanghai 200433, China.
Abstract:
The progression of SiC MOSFET technology from planar to trench structures requires optimized gate oxide layers within the trench to enhance device performance. In this study, we investigated the interface characteristics of HfO2 and SiO2/HfO2 gate dielectrics grown by atomic layer deposition (ALD) on SiC trench structures. The trench structure morphology was revealed using scanning electron microscopy (SEM). Atomic force microscopy (AFM) measurements showed that the roughness of both films was below 1nm. Spectroscopic ellipsometry (SE) indicated that the physical thicknesses of HfO2 and SiO2/HfO2 were 38.275 nm and 40.51 nm, respectively, demonstrating their comparable thicknesses. X-ray photoelectron spectroscopy (XPS) analysis of the gate dielectrics revealed almost identical Hf 4f core levels for both HfO2 and the SiO2/HfO2 composite dielectrics, suggesting that the SiO2 interlayer and the SiC substrate had minimal impact on the electronic structure of the HfO2 film. The breakdown electric field of the HfO2 film was recorded as 4.1 MV/cm, with a leakage current at breakdown of 1.1 × 10-3A/cm2. The SiO2/HfO2 stacked film exhibited significantly better performance, with a breakdown electric field of 6.5 MV/cm and a marked reduction in leakage current to 3.7 × 10-4 A/cm2. A detailed extraction and analysis of the leakage current mechanisms were proposed, and the data suggested that the introduction of thin SiO2 interfacial layers effectively mitigated small bandgap offset issues, significantly reducing leakage current and improving device performance.
More Related Videos
08:17Autonomous and Rechargeable Microneurostimulator Endoscopically Implantable into the Submucosa
Published on: September 27, 2018
08:59Synthesizing a Gel Polymer Electrolyte for Supercapacitors, Assembling a Supercapacitor Using a Coin Cell, and Measuring Gel Electrolyte Performance
Published on: November 30, 2022
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Capacitor With A Dielectric
Dielectrics are non-conducting materials with no free or loosely bound electrons. When a dielectric is...
Dielectric Polarization in a Capacitor
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Spherical and Cylindrical Capacitor
Conventionally, considering the symmetry, the electric field between the concentric shells of a spherical capacitor is directed radially outward. The magnitude of the field,...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...