Autogenously Calcined Clays from Coal Tailings Dumps as Supplementary Cementitious Material: From Exploratory...

Autogenously calcined clays from tailings dumps, which are formed by the ignition of the contained residual coal, represent a huge resource of potentially pozzolanic material worldwide. This work presents preliminary studies of samples from the Western coal regions in Germany and investigations on the first industrially produced cement with autogenously calcined tailings concerning its suitability as supplementary cementitious material (SCM). Samples of the tailings materials and blended cements were thoroughly characterized physically, chemically and mineralogically. The reactivity was studied using the R³ test and mortar compressive strength testing. The influence on cement hydration was studied using X-ray diffractometry (XRD) and isothermal calorimetry. The preliminary investigations showed that the material is basically suitable as SCM, as it consists mainly of SiO₂ and Al₂O₃, which partially occurs in X-ray amorphous form and has a low content of impurities, which can impair cement properties such as carbon or sulfur. The R³ reactivity and the relative compressive strength differed significantly depending on the sample. For the industrial cement production trial, low-processed material was used which still contained inert fractions. The average sample showed a relatively low R³ reactivity but still significantly higher than mostly inert materials such as limestone or quartz powder. Calorimetry and XRD investigations on cement pastes showed that the clinker reactions remain basically unaffected by the tailings. Mortar tests showed that the material contributes to strength development at a late age. It can be concluded that the tailings are basically suitable as SCM and, in appropriate blends, the clinker factor and, thus, the CO₂ footprint of cement can be reduced.