Related Experiment Video
Updated: May 21, 2025

Flash Infrared Annealing for Perovskite Solar Cell Processing
Published on: February 3, 2021
Mimicking Outdoor Ion Migration in Perovskite Solar Cells: A Forward Bias, No-Light Accelerated Aging Approach
Ulas Erdil1,2, Mark Khenkin1, Marko Remec1,3
1Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109 Berlin, Germany.
Abstract:
Perovskite solar cells (PSCs) are expected to transform the photovoltaic market; however, their unproven operational stability requires urgent attention, particularly accelerated aging tests. Currently, illumination is the primary stressor in such tests. In this work, we present an accelerated aging procedure consisting of prolonged forward biasing followed by a dark storage (postbias rest) phase, conducted entirely in the dark. During aging under forward bias, ion migration led to impeded charge transport, macroscopic defect growth, and an adverse response of the cells to short light soaking, all of which recovered in the postbias rest phase, yet resulted in increased recombination due to redistribution of ions. We found that outdoor operation of PSCs in Berlin, Germany, over a 20-month period exhibited similar dynamics, with periods of higher temperature and irradiance (spring-summer) aligning with the forward bias phase and cooler, dimmer periods (fall-winter) aligning with the postbias rest phase. This paves the way for accelerated aging tests that can mimic ion migration-induced degradation outdoors without requiring an illumination source.
More Related Videos
09:19In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for CuIn,GaSe2 Solar Cells
Published on: October 3, 2018
11:38Influence of Hybrid Perovskite Fabrication Methods on Film Formation, Electronic Structure, and Solar Cell Performance
Published on: February 27, 2017
Related Concept Videos
P-N junction
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...