Related Experiment Video
Updated: May 17, 2025

Nitrogen Compound Characterization in Fuels by Multidimensional Gas Chromatography
Published on: May 15, 2020
Analysis of Fatty Acid Composition by Gas Chromatography Using Hydrogen or Nitrogen as an Alternative Carrier Gas to
Kazuaki Yoshinaga1, Yasuhiro Iida2, Megumi Inoue3
1Faculty of Food and Agricultural Sciences, Fukushima University.
Abstract:
A collaborative study among 11 different Japanese laboratories was undertaken to devise an analytical method for determining the fatty acid composition of fats and oils by gas chromatography (GC) using hydrogen (H2) or nitrogen (N2) as carrier gases alternative to helium (He). This collaborative study was organized by the Alternative Gas for the GC Subcommittee of the Japan Oil Chemists' Society and was evaluated by analyzing a standard mixture of fatty acid methyl esters (Supelco 37 Component FAME Mix), soybean, and sardine oils. On a 50% cyanopropyl siloxane capillary column, the resolution of 37 FAME mixtures using He, H2, or N2 gas was greater than 1.0. For the area% of the 37 FAME mixtures, the reproducibility relative standard deviations ranged from 0.59 to 4.72% for He gas, 0.39 to 4.96% for H2 gas, and 0.60 to 4.91% for N2 gas. No significant difference was observed in the area% for the 37 FAME mixtures among the three carrier gases. Furthermore, no significant differences in the percentages of major fatty acids in the soybean and sardine oils were detected between the different carrier gases. This study also determined that the analysis time was prolonged when N2 gas was used compared to when H2 or He gas was used. However, a cyanopropyl siloxane capillary column for fast and selective separation could improve the analysis time using N2 gas. Therefore, we conclude that the present method using H2 or N2 gas qualifies as a tentative official method of the Japan Oil Chemists' Society.
Related Concept Videos
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography: Types of Detectors-II
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...

