Tailoring the Morphology of α-Cobalt Hydroxide Using Liquid/Liquid Interface and Its Application in Electrochemical...

The exertion of nanomaterials is subjugated by factors such as size, thickness, morphology, crystallinity, and composition, however, the ability to control these parameters, particularly the morphology, through conventional synthesis methods are challenging. Nevertheless, liquid/liquid interface-assisted methods have paved the way for more precise and controlled synthesis of nanomaterials. In this study, an n-butanol/water interface was used to synthesize α-cobalt hydroxide (CH) nanostructures, and the effects of solvent ratio and stirring rate on the properties of the product were examined. The transition from pure water to pure n-butanol alters the morphology from irregular nanoflakes to flower-like structures. A 1:1 solvent ratio produced nonaggregated flower structures with an increased active surface area and minimal charge transfer resistance. The agitation speed also affected the morphology; as the stirring speed increased from zero to 150 rpm, the morphology changed from aggregated needles to flower-like structures. The sample synthesized with a 1:1 solvent ratio and 50 rpm stirring speed (BW2) exhibited enhanced electrochemical activity, which was harnessed for electrochemical sensing with minimal multiwalled carbon nanotube (MWCNT) addition. The CH/MWCNT composite effectively detected ascorbic acid (AA) across a broad linear range of 1-200 μM with a detection limit of 0.0943 μM and provided accurate AA recovery in vitamin C tablets and artificial sweat. A flexible miniature sensor was also developed for AA detection, demonstrating the potential of liquid/liquid interfaces to modulate the morphology and hence the electrochemical properties of transition metal oxides for a wide range of applications.