Related Experiment Video

Updated: May 15, 2025

An Electrochemical Cholesteric Liquid Crystalline Device for Quick and Low-Voltage Color Modulation
10:33

An Electrochemical Cholesteric Liquid Crystalline Device for Quick and Low-Voltage Color Modulation

Published on: February 27, 2019

8.4K

Improvement of flicker phenomenon at low frequencies in AMOLED displays by applying compensation scheme of variable

Dong Sup Sim1,2, Sujin Jung1, Byeong Chul Kim2

  • 1School of Electrical and Electronic Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun- gu, Seoul, 03722, Republic of Korea.

Scientific Reports
|April 9, 2025
PubMed

Keywords:
FlickerHysteresisLow temperature poly-Si and oxide (LTPO)Organic light emitting diode (OLED)Slow transient de-trappingVariable refresh rate (VRR)

More Related Videos

Production and Characterization of Vacuum Deposited Organic Light Emitting Diodes07:44

Production and Characterization of Vacuum Deposited Organic Light Emitting Diodes

Published on: November 16, 2018

8.8K
Development of Efficient OLEDs from Solution Deposition07:09

Development of Efficient OLEDs from Solution Deposition

Published on: November 4, 2022

2.0K

Related Concept Videos

Biasing of FET01:22

Biasing of FET

Biasing a Junction Field Effect Transistor (JFET) is crucial for setting operational parameters and ensuring efficient functioning in electronic circuits. JFETs are characterized by using a single carrier type in N-channel or P-channel configurations, where the channel is surrounded by PN junctions. These junctions are central to the device's ability to control current flow.
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
196
Power Factor Correction01:20

Power Factor Correction

The power transmission to a factory involves the transfer of apparent power, a combination of active and reactive power. The power factor measures how effectively electrical power is converted into useful work output. The ratio of the real power (KW) that does the work to the apparent power (KVA) supplied to the circuit.
144
Voltage Doubler Circuit01:23

Voltage Doubler Circuit

A voltage doubler circuit integrates two main components: a clamping section and a rectifier section. The clamping section consists of a capacitor (C1) and a diode (D1), whereas the rectifier section is equipped with another diode (D2) and capacitor (C2). This circuit produces an output voltage with twice the amplitude of the sinusoidal input voltage.
419
Biasing of P-N Junction01:16

Biasing of P-N Junction

The operation of a p-n junction diode involves various biasing conditions, including forward bias, reverse bias, and equilibrium.
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
363
Biasing of Metal-Semiconductor Junctions01:27

Biasing of Metal-Semiconductor Junctions

Biasing metal-semiconductor junctions involves applying a voltage across the junction. Specifically, the metal is connected to a voltage source, while the semiconductor is grounded. This technique is essential for controlling the direction and magnitude of current flow in electronic devices, including diodes, transistors, and photovoltaic cells.
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
178
Load-frequency control01:28

Load-frequency control

Load-frequency control (LFC) is vital for maintaining power system stability, ensuring that frequency and power flows remain within acceptable limits during load changes. Turbine-governor control eliminates rotor accelerations and decelerations following load changes. However, a steady-state frequency error persists when the change in the turbine-governor reference setting is zero. In an interconnected power system, each area agrees to export or import a scheduled amount of power through...
96