Nonlinear active disturbance rejection mechanism based sliding mode control for enhancing electric power assisted
Tuan Anh Nguyen1, Tung Lam Nguyen2
1Faculty of Mechanical Engineering, Thuyloi University, Hanoi, Vietnam.
Abstract:
Electric Power Assisted Steering (EPAS) systems provide vehicle stability and safety under various driving conditions. Previous studies often applied only one or several traditional algorithms to control the performance of EPAS systems and ignored the influence of external disturbances. This increases the signal tracking error and causes other adverse effects on the system. In this article, we propose designing a nonlinear robust control mechanism that combines Sliding Mode Control (SMC) and Nonlinear Active Disturbance Rejection Control (NADRC) techniques to solve the existing issues. The article's novelty lies in utilizing a Nonlinear Extended State Observer (NESO) and Nonlinear Tracking Differentiator (NTD) to improve the performance of the proposed control mechanism. In addition, ideal assisted characteristic curves have been innovated based on nonlinear functions to improve the vehicle's driving comfort and stability, which is considered the second new contribution. The simulation results show that most of the steady-state errors of the proposed controller are only about 2% (v1 = 30 km/h) and no more than 3.5% (v2 = 70 km/h) except for steering motor current. The observed errors of the state variables are less than 1.4%, while the disturbance error is only about 6.9%. Finally, it is claimed that common issues like overshoot, chattering, and sensor noise do not affect the EPAS system when the proposed method is used to control it.
More Related Videos
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
11:44Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
Related Concept Videos
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
PID Controller
Root-Locus Method
This system can be represented by a block...
PI Controller: Design
Load-frequency control
