Related Experiment Video
Updated: May 14, 2025

Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization
Published on: May 19, 2019
Weathering and trace element mobilisation of MSWI bottom ash from wet and dry extraction
Philipp Ingold1, Gisela Weibel1, Patrick Kämpfer1
1Institute of Geological Sciences, University of Bern, Baltzerstrasse 1+3, 3012 Bern, Switzerland.
Abstract:
This study aims on the characteristics of occurring weathering processes of dry and wet extracted bottom ash materials and its effects on element emissions. To examine the role of initial water contact, dry bottom ash was experimentally moistened. Titration experiments were performed to elaborate buffer capacities and dissolution processes of the waste residues as a function of pH, and thermodynamic calculations were used to identify the solubility-controlling phases. Dry bottom ash showed highly alkaline in-situ pH conditions (pH 12.6). Continuous acid addition revealed a multi-stage process, which was characterised by the formation and dissolution of different phases across four different buffer systems, including portlandite dissolution and formation of ettringite and CSH phases in the first stage (pH > 12.1), dissolution of ettringite and CSH phases in the second stage (pH 9.7-12.1), carbonate dissolution during the third stage (pH 5.5-9.7), and dissolution of Al- and Fe-hydroxides in the fourth stage (pH < 5.5). Prior weathering processes in the moistened dry bottom ash and wet bottom ash resulted in a reduction of the in-situ pH (pH 12.1 and 10.3, respectively). Thermodynamic calculations suggested that phases containing Ca, S, Al, and Si were mainly responsible for the pH stabilisation. Emission trends as a function of pH generally aligned with calculated solubility curves, with dry bottom ash showing higher concentrations than wet bottom ash. Discrepancies, especially found in the dry bottom ash system, may be associated with elevated the presence of ligands (i.e., DIC, DOC), enhancing the mobility of selected elements (Al, Cu, Zn). ENVIRONMENTAL IMPLICATIONS: Bottom ashes investigated in this study are subject to environmental contaminants and potential hazards. Their characterisation and behaviour investigated during this work provides further insight into their behaviour and highlights the enhanced leaching of dry extracted bottom ash under naturally and environmentally relevant conditions.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
07:22Author Spotlight: Unraveling the Role of Earthworms in Enhancing Mineral Weathering for CO2 Removal
Published on: November 10, 2023
Related Concept Videos
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Washing, Drying, and Ignition of Precipitates