Substrate Bias-Driven Structural and Mechanical Evolution of AlCrN and AlCrSiN Coatings via Reactive Magnetron...

AlCrN and AlCrSiN coatings were deposited via reactive magnetron sputtering. This study investigates the effects of radio frequency (RF) substrate bias, ranging from 0 V to 200 V, on the chemical composition, microstructure, and mechanical properties of the coatings. All crystalline coatings exhibited a single wurtzite-type hexagonal close-packed (hcp) structure. At a 0 V substrate bias, the AlCrN coating consisted of porous V-shaped columnar crystallites, while the AlCrSiN coating exhibited a porous, fiber-like amorphous structure. As the substrate bias increased, crystal growth was promoted, void density decreased, and the surface morphology transitioned from a textured to a more rounded appearance. Additionally, the preferred orientation shifted toward the (101) direction. However, at excessively high substrate bias, re-nucleation occurred, leading to grain refinement and increased film densification, which in turn caused a further shift in the preferred orientation toward the (002) plane. Due to its multi-element composition and the low solubility of Si in nitrides, AlCrSiN coatings tend to exhibit an amorphous growth tendency during sputtering. As a result, their microstructure is more sensitive to substrate bias. This sensitivity results in the formation of a highly dense structure with an optimal crystallite size at a substrate bias of 100 V, leading to a hardness of 22.6 GPa-surpassing that of the AlCrN coating.