Applications of Multicolor Light-Emitting Devices Fabricated Using Tricolor Plastic Scintillators in LED Lighting,
Biwu Liu1, Xiaoxiao Zhang1, Feng Ding1
1National Key Laboratory of Opto-Electronic Information Acquisition and Protection Technology, Key Laboratory of Opto-Electronic Information Acquisition and Manipulation of Ministry of Education, Information Materials and Intelligent Sensing Laboratory of Anhui Province, School of Physics and Optoelectronic Engineering, Anhui University, Hefei, Anhui, 230601, P. R. China.
Abstract:
Plastic scintillators made of rare-earth complexs and organic scintillators are widely applied in radiation detection, environmental protection, nuclear medicine and industrial applications. Here, we fabricate the multicolor light-emitting devices by precisely controlling the composition and ratio of three scintillating materials doped into PMMA films using rare-earth complexes and organic compounds as dopants. Notably, the dose detection limits for the 'R' and 'RB' scintillating films are measured to be 2.22 µGy/s, which is significantly lower than the 5.5 µGy/s dose rate required for X-ray diagnostic applications. Although these scintillating films demonstrate relatively lower resolution in X-ray imaging, they remain effective for imaging millimeter-scale objects. The multicolor light-emitting devices developed by using trichromatic plastic scintillators show promising potential for applications in LED lighting, X-ray detection, and imaging systems.
More Related Videos
Related Concept Videos
Photoluminescence: Applications
Photoluminescence: Fluorescence and Phosphorescence
A pair of electrons in a...
Super-resolution Fluorescence Microscopy


