Recyclability of Plastics from Waste Mobile Phones According to European Union Regulations REACH and RoHS

Small waste from electrical and electronic equipment (WEEE) such as waste mobile phones are rich in plastic components. Recycling mobile phones is particularly challenging, since the main interest for recyclers is printed circuit boards, rich in valuable metals, while the plastic components are usually destined for thermal recovery. This study is dedicated to the assessment of the recyclability potential of the plastic fractions of end-of-life (EoL) mobile phones according to the European Union's (EU) Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) directives. A total of 275 plastic items (inventoried as casings, frames, and screens) were dismantled from 100 EoL mobile phones and analyzed to identify the type and abundance of polymers via Fourier-transform infrared spectroscopy (FTIR) and the presence of hazardous elements such as Br, Cl, Pb, and Cd via X-ray fluorescence (XRF). Polycarbonate (PC) (57% of samples) and polymethyl methacrylate (PMMA) (27% of the items) were identified as the most common prevalent polymers. In total, 67% of the items contained Cl (0.84-40,700 mg/kg), and 26% contained Br (0.08-2020 mg/kg). Hg was detected only in one item (17 mg/kg). Cr was found in 17% of the items, with concentrations between 0.37 mg/kg and 915 mg/kg, while Pb was found in 15% of the items in low concentrations (1-90 mg/kg). In conclusion, while hazardous elements are present in the plastic fractions of EoL mobile phones (with higher values in smartphones), their concentrations were below the regulatory limits, suggesting compliance with recycling regulations in the EU.