Related Experiment Video
Updated: May 16, 2025

Electron Channeling Contrast Imaging for Rapid III-V Heteroepitaxial Characterization
Published on: July 17, 2015
Passivation of Interface Defects in GaN-Based Metal-Insulator-Semiconductor Devices via In Situ Combined Plasma
Xiaohong Zeng1,2, Ying Wu1, Jinteng Zhang3
1School of Integrated Circuits, Nanjing University, Suzhou 215163, China.
Abstract:
Gallium nitride (GaN)-based metal-insulator-semiconductor (MIS) devices are essential for advanced power electronics but face performance limitations due to interface defects at the gate dielectric-semiconductor junction. To address these challenges, this study explored the effects and mechanisms of in situ pretreatments with H2, N2, and N2/H2 plasmas on GaN surfaces, utilizing an ultrahigh vacuum-interconnected system. A combined plasma treatment method was devised to integrate the benefits of three single plasma processes. In situ X-ray photoelectron spectroscopy and cathodoluminescence characterizations, complemented by ex situ atomic force microscopy analysis, demonstrate that the combined pretreatment effectively and nondestructively reduces carbon and oxygen impurities, compensates nitrogen vacancies, and passivates deep-level defects caused by a nonstoichiometric ratio. Furthermore, capacitance-voltage measurements confirm significant improvements in the electrical performance of the GaN MIS structures. The treatment reduces interface defect density by nearly an order of magnitude compared with untreated surfaces. These results underscore the potential of integrated plasma pretreatments to enhance the GaN-based device reliability and expand their applicability in semiconductor technologies.
Related Concept Videos
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Schottky Barrier Diode
Fermi Level Dynamics
Electron affinity in semiconductors refers to the energy gap between the minimum of its conduction band and the vacuum level and it is a critical parameter in determining how easily a semiconductor can accept additional electrons.
The work...

