Related Experiment Video
Updated: Sep 20, 2025

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator
Published on: February 14, 2025
Resilience Distributed MPC for Dynamically Coupled Multiple Cyber-Physical Systems Subject to Severe Attacks
Abstract:
This article proposes a resilient distributed model predictive control (DMPC) algorithm for a class of constrained dynamically coupled multiple cyber-physical systems (CPSs) subject to bounded additive disturbances. The algorithm is designed to address severe attacks on the forward controller-actuator (C-A) channel, the feedback sensor-controller (S-C) channel, and the channels between subsystems, without any prior information about the intruder available to the defender. To mitigate the negative effects of intruders, we consider a one-step time delay strategy in the local model predictive controller design. This strategy allows the generated controller data to be checked for acceptability before use. To ensure constraint satisfaction for an infinite-horizon MPC problem while accounting for the unknown duration of attacks, we develop a set of minimally conservative constraints in the open-loop control mode using a constraint tightening technique. Moreover, we obtain an equivalent finite number of constraints for the infinite-horizon problem to ensure recursive feasibility. To prevent tampered data from affecting control performance, a detector module is designed to decide whether data is used by its receiver. It is shown that the closed-loop system is uniformly ultimate boundedness (UUB) under any admissible attack scenario and disturbance realization. Finally, the effectiveness of the proposed algorithm is validated by a case study.
More Related Videos
Related Concept Videos
Distributed Loads: Problem Solving
Distributed Loads
For example, consider a bookshelf filled with books stacked vertically adjacent to each other. The weight of the books is evenly distributed over the length of the shelf. As a result, the pressure at different locations on the surface of the...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Cyclic Processes And Isolated Systems
In the case of a non-isolated system, the change in the internal energy is zero only if the process is cyclic. A thermodynamic process is considered cyclic if the system undergoes a series of changes and returns to its initial state.
Consider a cyclic process that returns to its initial state, undergoing a four-step process. The heat transfer along each...
Cable Subjected to a Distributed Load
Fast Decoupled and DC Powerflow

