Related Experiment Video
Updated: Jul 5, 2026

Clean Sampling and Analysis of River and Estuarine Waters for Trace Metal Studies
Published on: July 1, 2016
Measuring 210Po in natural waters: A comparison of three methods with similar results
James T Waples1, Gage J Hunter1, Rachel A Smith1
1School of Freshwater Sciences, University of Wisconsin-Milwaukee, 600 East Greenfield Avenue, Milwaukee, WI, 53204, USA.
Abstract:
Oceanographers have long used 210Po/210Pb disequilibria to quantify flux of particulate organic matter from the surface ocean. However, recent evidence by Roca-Martí et al. (2021) found that one of two commonly used methods to concentrate polonium from a natural water sample - coprecipitation with Fe(OH)3 - resulted in significantly lower 210Po activities than the other method - coprecipitation with Co-APDC. In this study, we employed the two methods used by Roca-Martí et al. (2021) and our own modified Fe(OH)3 technique to measure 210Po in freshwater samples collected from lake, harbor, river, and bog sources. We found a non-significant bias of ≤0.5 dpm 210Po 100 L-1 between all three methods. We found no evidence that 209Po was not as fully equilibrated with natural 210Po in 15 min as it was after 12 h of equilibration. And finally, we found no indication that organic complexation of dissolved 210Po was interfering with polonium recovery. Our results do not negate the findings by Roca-Martí et al. (2021). The behavior of 210Po in marine systems may indeed be different. However, we recommend that future studies also examine how the collection of iron precipitate and the composition and concentration of particulate organic matter might influence the recovery of absorbed 210Po from an unfiltered water sample.
More Related Videos
Related Concept Videos
Gravimetry: Overview
In precipitation gravimetry, the analyte is converted into a precipitate and weighed. For example, the silver content in a sample can be estimated by precipitating and...
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...

