Experimental Investigation on Thermal Performance Optimization of Na₂HPO₄·12H₂O-Based Gel Phase Change Materials for...

The content of modified materials in multicomponent gel phase change materials directly affects their performance characteristics. To investigate the influence of different contents of modified materials on the performance features of Na₂HPO₄·12H₂O-based multicomponent Gel Phase Change Materials, four single factors (Na₂SiO₃·9H₂O, C₃₅H₄₉O₂₉, KCl, and nano-α-Fe₂O₃) and their interactions were selected as influencing factors. Using the Taguchi method with an L₂₇(3¹³) orthogonal array, multi-step melt-blending experiments were conducted to prepare a novel multi-component phase change material. The characteristics of the new multi-component phase change material, including supercooling degree (ΔT), phase change temperature (T_m), latent heat of phase change (ΔH_m), and cooling time (CT), were obtained. In addition, characterization techniques such as DSC, SEM, FT-IR, and XRD were employed to analyze its thermal properties, microscopic morphology, chemical stability, and crystal structure. Based on the experimental results, the signal-to-noise ratio (S/N) was used to rank the influence of each factor on the quality characteristics, and the p-value from analysis of variance (ANOVA) was employed to evaluate the significance of each factor on the performance characteristics. Then, the effects of each significant factor on the characteristics of the multiple gel phase change materials were analyzed in detail, and the optimal mixing ratio of the new multiple gel phase change materials was selected. The results showed that Na₂SiO₃·9H₂O, KCl, and α-Fe₂O₃ were the most critical process parameters. This research work enriches the selection of composite gel phase change materials for solar greenhouses and provides guidance for the selection of different modified material contents using Na₂HPO₄·12H₂O as the starting material.