Related Experiment Video
Updated: Sep 18, 2025
Design of an Open-Source, Low-Cost Bioink and Food Melt Extrusion 3D Printer
Published on: March 2, 2020
Comparative Analysis of Dimensional Accuracy in PLA-Based 3D Printing: Effects of Key Printing Parameters and Related
Yifan Li1, Amin Molazem1, Hong-I Kuo1
1Institute for Macromolecular Chemistry, University of Freiburg, 79104 Freiburg, Germany.
None:
This study examines the impact of key printing parameters on the dimensional accuracy of 3D printing, specifically Fused Deposition Modeling (FDM) using PLA, utilizing two widely adopted printers: the LulzBot TAZ Pro and the Prusa MK4. A simplified parallel-line model was used to systematically evaluate the effects of print speed, nozzle temperature, bed temperature, and layer height on accuracy along the X, Y, and Z axes. The results showed that the Prusa MK4 generally provided better dimensional accuracy at lower print speeds (20-40 mm/s), higher nozzle temperatures (230 °C), and smaller layer heights (0.05 mm). In contrast, the LulzBot TAZ Pro performed better at higher print speeds (40-60 mm/s) and with thicker layers (0.2 mm). Scanning electron microscopy analysis further revealed distinct surface morphologies depending on the printer and parameter settings. These findings offer practical guidance for selecting suitable print settings across various application areas.
