Related Experiment Video
Updated: Sep 17, 2025

Tangential Flow Ultrafiltration: A “Green” Method for the Size Selection and Concentration of Colloidal Silver Nanoparticles
Published on: October 4, 2012
Development of a cloud point extraction method combined with ETAAS and ICP-MS for the preconcentration and
María Carmen Barciela-Alonso1, Elena Peña-Vázquez2, Juan José López-Mayán3
1Trace Element, Spectroscopy and Speciation Group (GETEE), Faculty of Chemistry, Instituto de Materiais (iMATUS), University of Santiago de Compostela, Av. das Ciencias, s/n 15782, Santiago de Compostela, Spain. mcarmen.barciela@usc.es.
Abstract:
The increasing industrial use of silver nanoparticles (AgNPs) has led to interest in their determination in different types of environmental complex samples, including saline matrices such as aquaculture waters. A simple, reliable, and green analytical method using instrumentation available in most of the laboratories has been developed for the determination of silver as nanoparticles in saline samples. Cloud point extraction (CPE) was used for the separation of AgNPs from seawater, and silver was then determined in the surfactant-rich extracts by electrothermal atomic absorption spectrometry (ETAAS). Parameters related to ETAAS and the cloud point extraction procedure (Triton X-114 concentration, volume of complexing agent (EDTA), pH and type of buffer, effect of repetitive extraction, matrix modifier, etc) were evaluated. A concentration of Triton X-114 of 12% (v/v), a volume of 750 μL of saturated EDTA, and a pH of 7.0 were selected as the optimum conditions for the separation of AgNPs. Standard addition calibration solutions in a concentration range from 0 to 3.0 μg L-1 of AgNPs were subjected to the CPE procedure and used for silver determination by ETAAS. The LOD and LOQ were 0.038 and 0.125 μg L-1 of silver (as AgNPs), respectively. The method is precise (whole procedure 9.7%) and accurate (recovery percentages 99±4%), showing a good selectivity for the extraction of AgNPs, while ionic Ag remains in the aqueous phase. Moreover, the results of size analysis of the nanoparticles in the surfactant extracts of seawater samples spiked with AgNPs (40 and 60 nm) by SP-ICP-MS and TEM were in good agreement.
Related Concept Videos
Precipitation Titration: Endpoint Detection Methods
In the Volhard method, a standard excess of AgNO3 is first added to the...
Precipitation Titration Curve: Analysis
Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...
Precipitation and Co-precipitation
Effects of EDTA on End-Point Detection Methods
In the visual method, metal-ion indicators (metallochromic dyes), which have distinct colors in their free and complex forms, are added to the mixture to signal the titration's end point. They form stable complexes with metal ions, but these complexes are weaker than the corresponding metal–EDTA complexes. As a...
Colloidal precipitates

