Related Experiment Video
Updated: Sep 17, 2025

Visualization of Flow Field Around a Vibrating Pipeline Within an Equilibrium Scour Hole
Published on: August 26, 2019
A hybrid methodology for uncertainty analysis of vibration response in fluid-filled pipes
Zhen Li1, Bilong Liu1, Jianghai Wu2
1School of Mechanical & Automobile Engineering, Qingdao University of Technology, No. 777 Jialingjiang Road, Qingdao 266520, China.
Abstract:
Reducing vibration and noise in fluid-filled pipeline systems is critical for enhancing the acoustic stealth of underwater vehicles. However, uncertainties inherent in the complex vibro-acoustic response and transmission of these systems render traditional deterministic methods inadequate. To address this, this paper proposes a hybrid methodology, named ISM-PCE, combining the impedance synthesis method (ISM) and polynomial chaos expansion (PCE), to efficiently estimate the low-order statistical moments of the frequency response function (FRF) of pipelines, validated by experiments and numerical simulations on homogeneous straight pipes. Results show that the normal ISM-PCE accurately estimates the mean FRF under single dimensional parameter (pipe inner diameter) uncertainty, but its variance estimation accuracy is insufficient in the resonance frequency band. Therefore, a stochastic frequency transformation method was introduced, significantly improving variance estimation accuracy and enabling successful multiple dimensional parameters uncertainty analysis. The results demonstrate that the normal ISM-PCE and its improved variant provide an efficient and accurate methodology for uncertainty quantification of vibration responses in fluid-filled pipeline systems. Although only fluid-filled straight pipes have been analyzed in this paper, the proposed methodology is generalizable and applicable to more complex fluid-filled pipeline systems.
Related Concept Videos
Bending of Material: Problem Solving
Single Pipe Systems
In a Type I problem, fluid properties (density and viscosity), pipe characteristics (including diameter, length, and surface roughness), and the flow rate or average velocity are...
Dimensional Analysis
In fluid mechanics, dimensional...
Typical Model Studies
Application of the Linear Momentum Equation
The goal is to determine the force components in the x and y directions to hold the pipe in place. Since...
Stresses under Combined Loadings
The process begins by slicing the tube at critical points and analyzing the internal forces and stress components at these sections, focusing on the centroid. Normal stresses, generated by axial forces and bending moments, are either compressive or tensile and vary across the section from...

