An Experimental Investigation on the Mechanical Performance of Engineered Cementitious Composites with Different...

Engineered cementitious composites (ECCs), known for their superior ductility and strain-hardening behavior compared to conventional concrete, have been predominantly studied with polyvinyl alcohol (PVA) fibers. However, the potential economic and technical advantages of incorporating steel fibers into ECCs have been largely overlooked in the literature. This study investigates the mechanical performance of ECC reinforced with different types of steel fibers, including straight, twisted, hooked, and hybrid fibers of different lengths, as compared to PVA. The inclusion of various supplementary cementitious materials (SCMs) such as slag and fly ash with each type of steel fiber was also considered at a constant fiber volume fraction of 2%. The mechanical properties were assessed through compressive strength, splitting tensile strength, and four-point flexural tests along with calculations of toughness, ductility, and energy absorption capacity indices. This study compares the mechanical properties of different ECC compositions, revealing that ECCs with hybrid steel fibers (short and long) achieved more than twice the tensile strength, 12.7% higher toughness, and 36.4% greater energy absorption capacity compared to ECCs with PVA fibers, while exhibiting similar multiple micro-cracking behavior at failure. The findings highlight the importance of fiber type and distribution in enhancing an ECC's mechanical properties, providing valuable insights for developing more cost-effective and resilient construction.