Related Experiment Video
Updated: Sep 14, 2025

A 100 KW Class Applied-field Magnetoplasmadynamic Thruster
Published on: December 22, 2018
The response characteristics of 10 kV typical distribution transformers under high-altitude electromagnetic pulse
Xiaoyu Zhou1, Shiji Li1, Junna Li1
1State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an 710024, People's Republic of China.
Abstract:
High-altitude electromagnetic pulses (HEMP) have the potential to inflict substantial harm on the distribution system through coupling with overhead lines. This study investigates HEMP-induced conduction effects on 10 kV distribution transformers through theoretical analysis and test validation. Transmission line theory was employed to analyze the coupling environment of overhead lines under HEMP. To evaluate transformer response characteristics to these conducted disturbances, a comprehensive test system was established, comprising both simulation models and physical test platforms. The response characteristics of the transformers and the distribution pattern of winding voltages were finally determined. The results show that the 10 kV distribution transformer exhibits a damage threshold at 267.5 kV. There is significant non-uniform voltage distribution across the transformer winding with Up_max = 164.3 kV and ΔUp_max = 78.8 kV. Both maximum values occur at the first turn position, indicating this region as the most probable initiation site for insulation breakdown due to concentrated dielectric stress.
More Related Videos
Related Concept Videos
Transformers in Distribution System
Distribution substation transformers come in various ratings and typically use mineral oil for insulation and cooling. To prevent moisture and air from entering the oil, some transformers use an inert gas like nitrogen to fill the...
Instrument Transformers
Secondary Distribution
In residential areas, 120/240 V single-phase, three-wire service is commonly used for lighting, outlets, and large appliances. Urban areas with high-density loads...
Insulation Coordination
Energy Losses in Transformers
There are four main reasons for energy losses in transformers.
The first cause can be the high resistance of the...
Primary Distribution

