Related Experiment Video
Updated: Sep 14, 2025

Quantitative Atomic-Site Analysis of Functional Dopants/Point Defects in Crystalline Materials by Electron-Channeling-Enhanced Microanalysis
Published on: May 10, 2021
Liquid-cell annular dark-field scanning transmission electron microscopy imaging of single crystal samples on a
Masaki Takeguchi1, Jonathan Lueke2, Matthew Reynolds2
1Research Center for Energy and Environmental Materials, National Institute for Materials Science, Tsukuba, Ibaraki, Japan.
Abstract:
In liquid cell (LC) annular dark-field scanning transmission electron microscopy (ADF-STEM), the spatial resolution is limited by the low ratio of signals from samples to background signals from the silicon nitride window membranes and liquid. We report the development of a double-tilt LC holder for atomic-resolution LC-ADF-STEM imaging of single-crystal samples under zone-axis incidence conditions. A SrTiO3 <001> lamellar sample, approximately 100 nm thick, was prepared using the focused ion beam technique and transferred onto a silicon nitride window membrane of an LC chip via a glass probe pick-up method in air, which avoids Ga ion beam-induced damage to the window membrane. The sample adhered to the high-flatness window membrane and remained immobile, even when embedded in a water droplet. The sample and pure water were enclosed in an LC and observed under <001> zone-axis incidence conditions using aberration-corrected ADF-STEM. Electron channeling along the atomic columns enabled atomic-resolution LC-ADF-STEM imaging with high contrast, sufficiently overcoming background signals from window membranes and liquids. This high-contrast imaging technique could lower the probe current and is expected to mitigate electron-beam-induced radiolysis and minimize undesired sample damage, particularly under high-magnification imaging conditions.

