Comparative Evaluation of Color Stability in Bioactive and Conventional Resin Cements Under Thermal Stress Conditions

Bioactive resin-based cements (RBCs) were recently introduced, but data on their color stability remain limited. This study analyzed the impact of thermal cycling on the color and whiteness of bioactive RBCs. Specimens (n = 10) were fabricated from Panavia SA Universal (PN), Predicta Bioactive Cement (PR), and ACTIVA BioACTIVE cement (AC). CIE Lab* values were registered at baseline and after 5000, 10,000, and 15,000 thermal cycles (5-55 °C). Changes in color (ΔE₀₀) and whiteness index (ΔWI_D) were calculated and compared. Material type and thermal cycling significantly affected ΔE₀₀ and ΔWI_D (p < 0.001). AC showed the highest ΔE₀₀ values at all stages (p < 0.001), with a progressive increase over time. PN differed significantly between early and later cycles (p < 0.05), while PR remained stable (p > 0.05). Analysis of color parameters indicated that AC underwent the most pronounced changes, particularly in Δa and Δb, while PN exhibited the greatest shift in Δb. For ΔWI_D, PR had significantly lower values than PN (p < 0.05) and AC (p < 0.001), with no difference between PN and AC (p > 0.05), and thermal cycling significantly affected all groups, with PR and AC differing across all stages (p < 0.05). Thermal cycling significantly influenced the color stability and whiteness of bioactive RBCs, with AC exhibiting the greatest changes over time, while PR demonstrated superior stability.